Final Finish 3000

Previously Known As PO85U.

The final stage of the machine polishing process requires a fine grade polish to remove micro-marring sometimes incurred during the paint correction stage.

Menzerna Final Finish 3000 contains fine abrasives to remove slight marks and to burnish the paintwork to a high gloss. For best results use on a finishing pad with a machine polisher on a medium speed. With minimal residue left over from working it there is less chance of introducing marks back into the paintwork from over buffing.

Features:

• Removes fine swirls & holograms
• Adds a high gloss to the surface
• Suitable for soft, intermediate & scratch resistant paint finishes
• Filler-free formulation ensures minimal drop back
• Contains lubricants allowing for longer working times

How To Use:

• Ensure paint surface is cool to the touch
• Use Final Finish 3000 on a medium or soft pad (depending on the level of cut required)
• If using a DA polisher, apply 3-4 pea-sized drops to the pad
• If using a rotary polisher, apply 1-2 pea-sized drops to the pad
• Place pad against paintwork & use a slow speed to spread the polish
• With a DA use speed 4-5, with a rotary speed 3-4 to work polish evenly into paintwork until a film remains
• Buff film with a clean, soft microfibre
• Can also be applied by hand using a foam applicator

Technical Specification:

• Cut: 3/10
• Gloss: 9/10
• Filler-free formulation
• Contains diminishing abrasives
• Does not contain chemical cleaners
• Suitable for application with rotary, DA or by hand